Content-type: text/html Manpage of mondoarchive

mondoarchive

Section: User Commands (1)
Index Return to Main Contents

NAME

mondoarchive - a backup / disaster-recovery tool.

SYNOPSIS

mondoarchive -O [ options ] : backup your PC
mondoarchive -V [ options ] : verify your backup

DESCRIPTION

mondoarchive backs up a subset of your files, your entire filesystem, or even images of non-Linux filesystems to CD's, tape, ISO images or an NFS mount. In the event of catastrophic data loss, you will be able to restore everything, taking a PC from bare metal to its original state if necessary.

With -O, it backs up your filesystem to CD, tape, ISO images or NFS share. Boot floppies or a special boot CD will be created to allow you to restore from bare metal if necessary.

With -V, it verifies the backup against the live filesystem. This option may be used in combination with -O to verify a backup after its creation, or on its own to see how much the live filesystem has changed since the backup was made.

Call mondoarchive without flags to make it autodetect as many settings as possible, ask you politely for the rest, and then backup and verify your OS or a subset thereof.

To restore data, either run mondorestore from the command line or boot from the emergency CD/floppies generated during the backup process. The latter will come in handy if a gremlin wipes your hard disk.

BACKUP MEDIA

You must specify one of the following:-
-c speed: Use CD-R drive as backup device and its (write-once) disks as backup media.
-C speed: Use CD-R drive as a streaming device, almost like a tape streamer. Use write-once disks as backup media. Experimental.
-i: Use ISO files (CD images) as backup media. This is good for backing up your system to a spare hard drive. The -n switch is a wiser choice if you plan to restore from a remote filesystem.
-n mount: Use files residing on NFS partition as backup media. mount is the remote mountpoint, e.g. '192.168.1.3:/home/nfs' for my fileserver. Please mount it before backing up/verifying.
-t: Use tape streamer as backup device and its tapes as backup media.
-w speed: Use CD-RW drive as backup device and its (write/rewrite) disks as backup media. Mondo will wipe media before writing to them.

MAJOR OPTIONS

-D: Make a differential backup: examine the filesystem and find which files have changed since the last full backup was carried out. Backup only those files.
-E ``path ...'': Exclude path(s) from backup. The paths should be separated with a whitespace. Note that mondo automatically excludes removable media (/mnt/floppy, /mnt/cdrom, etc.). For exampe, if you are backing up to an NFS mount but you do not want to include the contents of the mount in a backup, exclude your local mountpoint with this switch. It will also work with partitions, e.g. /dev/sdd4 if you have a peculiar SCSI zip drive which insists on showing up in the mountlist. NB: If you exclude /dev/sdd4 then the /dev entry itself will still be backed up, even though the mountlist entry will be suppressed.
-I ``path ...'': Include paths(s) in backup. The default backup path is ``/'' but you may specify alternatives, e.g. -I ``/home /etc'' to override that.
-N: Exclude all NFS-related devices and mountpoints from backup. In other words, only backup the local hard disks.
-d dev|dir: Specify the backup device (CD/tape) or directory (NFS/ISO). For CD-R[W] drives, this is the SCSI node where the drive may be found, e.g. '0,1,0'. For tape users, this is the tape streamer's /dev entry, e.g. '/dev/st0'. For ISO users, this is the directory where the ISO images are stored. For NFS users, this is the directory within the NFS mount where the backups are stored. The default for ISO and NFS is '/root/images/mondo'.
-g: GUI mode. Without this switch, the screen output of mondoarchive is suitable for processing by an 'expect' wrapper, enabling the user to backup nightly via a cron job. However, if you want to run this program with an attractive but non-cron-friendly interface then use '-g'.
-k path: Path of user's kernel. If you are a Debian or Gentoo user then specify -k FAILSAFE as your kernel. Otherwise, you will rarely need this option.
-m: Manual (not self-retracting) CD trays are often found on laptops. If you are a laptop user, your CD burner has BurnProof technology or you experience problems with mondo then please call mondoarchive with this switch.
-o: Use LILO as boot loader of boot floppy/CD instead of SYSLINUX/ISOLINUX. By default, SYSLINUX is used for floppies and ISOLINUX for CD's. Use LILO if you prefer to use that boot loader. NB: This does not affect which boot loader you use to boot your PC, merely the boot loader used by the CD's/floppies created by Mondo.
-s size: How much can each of your backup media hold? You may use 'm' and 'g' on the end of the number, e.g. '700m' for an extra-large CD-R. You no longer need to specify the size of your cartridges if you are backing up to tape.
-x 'dev ...': Specify non-Linux partitions which you want to backup, e.g. NTFS or BeOS. It is wasteful because it backs up the unallocated sectors as well as the allocated ones.

MINOR OPTIONS

-[0-9]

Specify the compression level. Default is 3. No compression is 0.

-A command

This command will be called after each CD/NFS/ISO file is written. It is useful if you want to do something with an ISO after creating it, e.g. write it to a CD burner using a non-standard command. -A understands two tokens - _ISO_ and _CD#_ - which will be translated into the ISO's filename and its index number (1, 2, ...) respectively. So, you could use -A 'foobackup _ISO_; rm -f _ISO_' to feed each ISO to some magical new backup tool.

-B command

This command will be called before each CD/NFS/ISO file is written. See -A for more information.

-F

Do not offer to write boot+data floppy disk images to 3.5-inch floppy disks. The images will remain in /root/images/mindi until your next backup run, however.

-H

When you boot from the tape/CD, your hard drive will be wiped and the archives will be restored. Your decision to boot from the tape/CD will be taken as consent. No further permission will be sought. Use with caution.

-L

Use lzo, a fast compression engine, instead of bzip2. You may find lzo on Mondo's website or via FreshMeat. WARNING! Some versions of LZO are unstable.

-P tarball

Post-nuke tarball. If you boot into Nuke Mode and everything is restored sucessfully then the post-nuke script will be sought and executed if found. This is useful for post-restore customization. It is assumed that the tarball (.tar.gz format) will contain not just the post-nuke script (or binary, or whatever it is) but also any files it requires.

-S path

Specify the scratchdir, the directory where ISO images are built before being archived. If you have plenty of RAM and want to use a ramdisk for scratch space, specify its path here.

-T path

Specify the tempdir, the directory where temporary files (other than ISO images being assembled) are stored. See -S

-W

Don't make your backup self-booting. This is a really bad idea, IMO. Don't do this unless you have really great boot disks in your hand and you are an anally retentive SOB who can't wait 2 minutes for Mindi to run in the background. If you use -W then you'd better know what the hell you're doing, okay?

-e

Don't eject the CD or tape when restoring.

-f device

Specify the drive on which your Master Boot Record lives. Usually, this is discovered automatically.

-l GRUB|LILO|RAW

Specify the boot loader. By default, your Master Boot Record is examined and the boot loader can usually be discovered. If you specify RAW then the MBR will be backed up and restored byte-for-byte without any analysis. It is likely that you will also need to specify the boot device with -f <dev>.

NOTES

A link to Mondo's HTML-based manual (by Mikael Hultgren, Cafeole, Randy Delphs, Stan Benoit, and me) may be found at http://www.microwerks.net/~hugo/docs/docs.html - or in /usr/share/doc/mondo-x.xx on your hard drive.

BUGS

If you have very little hard disk space, Mondo doesn't like that. It does not handle Devfs very well either, or PC's with less than 64MB of RAM. IPv6 is not supported. The command-line options are cryptic. The manual needs to be updated. Users don't read manuals anyway, so I'm not sure why I even bother...

EXAMPLES

Backup to a directory; note that /mnt/foo's contents will be backed up except for its ISO's unless you exclude it, as follows:-
mondoarchive -Oi -d /mnt/foo -E /mnt/foo

Backup to tape, using lzo compression (WARNING - can be unstable):
mondoarchive -Ot -d /dev/st0 -L

<troff> Put in man file: If tape refuses to work, call it a mother phucker.

Verify existing tape backup which was made with lzo compression:-
mondoarchive -Vt -d /dev/st0 -L -g

Backup to 700MB CD-R disks using a 16x CD burner:
mondoarchive -Oc 16 -s 700m -g

Verify existing CD-R or CD-RW backup (works for either):-
mondoarchive -Vc 16

Backup to an NFS mount:
mondoarchive -On 192.168.1.2:/home/nfs -d /Monday -E /mnt/nfs

Verify existing NFS backup:-
mondoarchive -Vn 192.168.1.2:/home/nfs -d /Monday

Backup to 650MB CD-RW disks using a 4x CD ReWriter:
mondoarchive -Ow 4

Backup just your /home and /etc directory to 650MB CD-RW disks using a 4x CD ReWriter:
mondoarchive -Ow 4 -I ``/home /etc''

Backup to ISO's non-interactively, e.g. as a job running in /etc/cron.daily:
mkdir -p /bkp/`date +%A`; mondoarchive -Oi -9 -d /bkp/`date +%A` -E /bkp

AUTHORS

Hugo Rabson (coding) hugo@firstlinux.net
Jesse Keating (packaging) hosting@j2solutions.net
Stan Benoit (testing) troff@nakedsoul.org
Mikael Hultgren (docs) mikael_hultgren@gmx.net
See mailing list at http://www.mondorescue.com for technical support.

This document was created by man2html, using the manual pages.
Time: 17:42:02 GMT, April 23, 2003