- + Frequently Asked Questions
- + Crystals Primer
- + Crystals User Guide
- + Crystals Manual
- - Cameron Manual
- 1. Introduction
- 2. How To Get Started
- 3. Data Input
- 4. Outputting Data
- 5. Editing The Atom List
- 6. Obeying Files
- 7. Graphical Output Devices
- 8. View Direction Control
- 9. Include And Exclude
- 10. Drawing Style Control
- 11. Connectivity Control
- 12. Control Of Colour
- 13. Atom Labelling
- 14. Other Picture Controlling Commands
- 15. Symmetry Input
- 16. Crystal Packing Commands
- 17. Add And Move - Further Symmetry Related Commands
- 18. Distance And Angle Calculations
- 19. Information On Data Held Within The Program
- 20. Group Definitions
- 21. Miscellaneous Commands
- 22. How To Stop The Program
- 23. Menu Definition File
- 24. Some Useful Ideas
- 2. How To Get Started
- + Index
- Fri Jun 2 2000
- + Crystals Primer
Cameron Manual
Chapter 21: Miscellaneous Commands
RESET
This command allows the user to begin again without having to exit and reload CAMERON. All current flags will be set to their initial states. Note that if a CAMERON.INI file is present it will not be obeyed after a RESET command. The screen will be set to VGA automatically (as on startup) if a CAMERON.LJP file is present.
LOG
The LOG command is used to generate a log of the CAMERON session, this may be OBEYed later if required. LOG must be followed by a filename. If a file is already in use for a log file then the log information will be transferred to the new file.
EDIT
ON
OFF This sets the edit option which is used when an error is found in an input line. If edit is on (the default) then the user is prompted as described in Chapter 1. If not the computer will bleep and put up the message "Error: Automatic Abandon", ignore any unexecuted commands and wait for a new input line.
MENUS
ON
OFF The user is able to control the program via push button menus at the side of the screen (PC only). These can be turned on or off as required. When the menus are active the user can input commands as normal by typing - they will appear in a box at the bottom of the screen.
ISSUE
This allows the user to execute a single system command. This command should be enclosed in quotes if it is longer than one word or if it corresponds to a CAMERON command.
This allows the user to print a hardcopy file. The file will be closed if it is currently attached to CAMERON via a COPY command. NOTE that the print job will be very slow - it may be quicker to close down CAMERON first.